Guide of Access Controller: What is ESD Access Control System?

Pongee ESD Access Control System

What is ESD Access Control System?

ESD access control system, anti-static access channel, stand-alone systems (integrated human static test access channel gate) is a combination of static test ban control gate and channel advanced products.

 

In many settings electrostatic protection areas (EPA) in places where static footwear and static wrist strap testing are based on the traditional way of testing only be, difficult to implement untested first time by personnel prohibited from entering the case of the EPA. ESD access control system for this shortcoming, direct and effective solution to the problem, workers entering the EPA zone really good staff wear or anti-static wrist strap shoes ready, combine three roller gates, wing gates, swing gates, automatic door sensors, etc.

 

As electronic locks or access gates ESD anti-static test personnel access control equipment. Plant personnel can provide basic access control functions and static test ways and orderly civilization, did not enter the EPA to eliminate electrostatic protection areas by electrostatic testers, and rapid control off the rod or gate, organize evacuations in case of emergency.

 

Looking for Best ESD Controllers? Don’t Miss Pongee!

Taiwan famous and professional access control system manufacturer, Pongee Industries Co., Ltd. also provides excellent ESD access control system.

 

The advanced Pongee ESD ACS system is integrated with ESD Tester, contactless Access system and ESD Management Application software together. During the past time, many EPA (Electrostatic protection Area) control for the electrostatic shoes, wrist strap are almost tested then recorded manually so easy to make mistakes, this not only wastes time but not easy to audit.

 

The Pongee ESD ACS system is managed by PC to make sure the person to test the ESD resistance value before entering EPA area, record the access time and control the turnstile or release alarm to reject illegal access. Also, with the failsafe function of the turnstile or electrical locks in emergency to secure the personal life.

 

Features of Pongee ESD Controller

  • The system is mainly consisted of ESD tester, ESD access controller, management software, communicators and the electrical gate controller (turnstile, strike or power bolt).
  • ESD permission has 8 options as checking Left and (or) Right hand and (or) the feet combination and the qualified impedance value range.
  • The ESD tester PP-6750V/ESD provide permission level setting, inquiry, alarm function, test and record the PASS or NG judgment.
  • The Access Controller equipped with LCD screen for taking the action, display the card & staff number, calendar year and date, clock, testing data and the error message.
  • The access controller could control the intelligent gating devices such as Turnstile, swing gate or plate gate. Also, it could control the electric locks such as power bolt, magnetic lock or strikes. The user also could push the exit button to go out.
  • The ESD ACS can be integrated with Time attendance module; it can provide the ESD ACS access events served as Time Attendance data base to make many HR reports.

 

Main Application Fields

ESD access control system are used for SMT production line, clean room such as semiconductor fab, high tech RD room, or military ESD sensitive areas, explosive processing areas, maintain or calibration areas for aerospace industries, pharmacy , bio-chemical and hospital ESD restraint areas.

 

If you have requirement or more information of ESD access control system, no hesitation, come and visit Pongee Industries Co., Ltd. for more details of access control system.

 

Pongee Industries Co., Ltd.

5F., No.738, Chung-Cheng Rd., Chung-Ho District, New Taipei City 23511, Taiwan

TEL: +886-2-8228-0198

FAX: +886-2-8228-0191

E-mail: pongee@pongee.com.tw

Taiwan Best Source of Ceramic Capacitors – Zonkas

A ceramic capacitor is a fixed-value capacitor in which ceramic material acts as the dielectric. It is constructed of two or more alternating layers of ceramic and a metal layer acting as the electrodes. The composition of the ceramic material defines the electrical behavior and therefore applications.

Wiki: Ceramic Capacitor

 

Established in 1982, Zonkas Electronic Co., Ltd. is the professional manufacturer of capacitor, inductor and transformer.

 

Their registered brand is ZONKAS and main products including: various inductors, transformers, safety capacitor (Y1, Y2, X1, X2), ceramic capacitor, film capacitor and electrolytic capacitor.

 

Zonkas product quality is reliable and certified by UL, CUL, VDE, NEMKO, ENEC, CQC, and EK. Their upgrade the UL voltage to be 500VAC on 2014, and the quality system was certified by ISO9001 and IS14001. Green procedure was implement and also compliance with RoHS.

 

Zonkas sold their excellent ceramic capacitors in many countries, like China, Singapore, Japan, India, France, German, U.S.A, Australia, etc.

 

The stable quality, reasonable price, fast delivery, kindness service are Zonkas advantages and this company will be your good partner for capacitors. Learn more information about Zonkas ceramic capacitors please do not hesitate to check out their product catalog.

 

 

Zonkas Electronic Co., Ltd.

No.13, Ln. 65, Fuya Rd., Xitun Dist., Taichung City 40764, Taiwan

TEL: 886-4-24613820

FAX: 886-4-24612387

E-mail: zonkas@ms18.hinet.net

Choose Coolmosa As Your CPU Cooler Manufacturer…

Taiwan Professional Metal Stamping Manufacturer

Established in 1988, Coolmosa Technology Co., Ltd. was specializing in stamping of metal, and then enters into the cooler field in 2001 for customer’s requirement. Have ISO 9002 approval, Coolmosa always does its best to control quality seriously. Rely on outstanding technical expertise and extensive experiences, the company offers the service and products that suite your business needs the best. Not only offer manufacturing, subassembly, but also provide design and test services as well as OEM for your customer’s models.

 

In the past fifteen years, even though there had been depressed times in the economy environment, Coolmosa has being operated and run smoothly under the current management who are committed to provide honest service and the best professional products to clients.

 

Best Choice of CPU Cooler

Coolmosa CPU cooler is applying the newest “Fins Skiving” Technology for top performance; this technology enables greater surface area and thus increased cooling performance.

 

Coolmosa has strong R&D team, enable them to constantly develop the top quality CPU cooler and PC thermal cooling products for the market requirement. Their mission is to provide exceptional satisfaction to customers by understanding their needs and thus, keep on developing high performance and innovative cooling products.

 

Fins Skiving Technology in is one of the worlds most advanced Technology, new Concept developed and produced by CoolSonic, though this new technology enables greater surface area for thermal dissipation and thus increased cooling performance.

 

Choose Coolmosa As Your CPU Coolers Supplier

Product experience, low price, availability and best service are the cornerstones for a foundation based on Coolmosa to customers. If you are interested in Coolmosa’s metal stamping or need further information, please stay in touch with Coolmosa, the world’s leading manufacturer of CPU cooler.

 

Coolmosa Technology Co., Ltd.

No.8, Ln. 292, Sanjun St., Shulin Dist., New Taipei City 23865, Taiwan

TEL: 886-2-26761138

FAX: 886-2-26761337

E-Mail: max@coolmosa.com.tw

Your Best Power Capacitor Manufacturer – Yuhchang Electric

First Choice of Capacitor Supplier – Yuhchang Electric Co., Ltd.

Established in 1967, Yuhchang Electric Co., Ltd. has been the top-one power capacitor manufacturer in Taiwan. In order to provide quality and reliable service, Yuhchang gained the ISO 9002 quality standard in 1994 and ISO 9001:2000 certifications in 2002. Their products have got good reputation at home and abroad.

 

Back by their strong R&D capability and professional experience in this industry, Yuhchang believe that developing the most unique and superior products is the best way to meet / exceed customers’ expectations. They strive to provide our clients new products, advanced designs, and patented innovations so that they can stay on the top of their markets.

 

To keep growth and improvement, Yuhchang will base on the quality policy of “Best Quality, Delivery on Time, and Quick Service” to contribute out best to all customers.

 

If you are looking for power capacitors, high and low frequency capacitors, automatic capacitor banks etc., Yuhchang will be your best choice. More details please visit: www.yc-capacitor.com

 

 

Yuhchang Electric Co., Ltd.

No.59, Chung Cheng St., Ching Shui Dist., Taichung City 43653, Taiwan (R.O.C.)

TEL: (04)2622-4188

FAX: (04)2622-4646

E-MAIL: yce919@ms1.hinet.net

Taiwan Automatic Capacitor Banks Supplying Expert – YUHCHANG Electric Co.

Choose YUHCHANG’s Capacitors That Will Be The Most Correct Decision You’ve Made!

Do you know where to find high quality and safety automatic capacitor banks? Here, I’m going to introduce a manufacturer which providing kinds of quality capacitors, they are YUHCHANG Electric Co., Ltd.

 

YUHCHANG is one of biggest capacitors manufacturers in the industry. Their products have CNS (Chinese National Standard) and UL approval. Also, they are an ISO-9001 company. Recently years to improve power quality and increase the efficiency of energy utilizing for power users, they present automatic capacitor banks to save more energy and create more profits for power users.

 

YUHCHANG’s Automatic Capacitor Banks Have Following Features:

 

  1. Dry type capacitors are designed and manufactured in according to CNS 1179, and are certificated to use CNS mark. Capacitors are made of metallized polypropylene films with self-healing. Each capacitor has internal protective device (overpressure tear-off fuse) to automatic cut off power to avoid relative disaster in case of capacitor failure.

 

  1. The product uses Automatic Power Factor Regulator (APFR) with Yuhchang brand to automatically precisely control reactive power for power system. The target power factor can be adjustable. The control principle is according to load current and target power factor to switch in or out capacitors. It is a very useful and effective equipment for energy saving.

 

  1. To suppress high harmonic currents and Inrush Current of switching in capacitors, each capacitor circuit is equipped a dry type, H class, series reactor (SR) to extend the life of capacitors and magnetic contacts.

 

  1. For high safety, each capacitor circuit uses independent high speed fuses (HRC) and Magnetic contacts (MC) controlled by APFR.

 

  1. The cabinet is made of steel sheets with anti-rust treatment. Inner parts, equipment and connection are all installed for easy use and maintenance under consideration of insulation, ventilation, dust proof and waterproof.

 

Now that you know what features of Yuhchang’s automatic capacitor bank are, whether there are other questions that you want to know? If you need further details about capacitors, welcome to check out the website of Yuhchang and feel free to send inquiry or contact with them directly.

YUHCHANG Capacitors Manufacturer
No.59, Chung Cheng St., Ching Shui Dist., Taichung City 43653, Taiwan (R.O.C.)

TEL: 04-2622-4188

FAX: 04-2622-4646

E-mail: yce919@ms1.hinet.net

The Best Access Controllers Cooperation Partner – Pongee Industries Co., Ltd.

Are you still looking for high quality access control systems? If you are, I recommend that you can try to visit the website of a company with over 25 years’ experiences, Pongee Industries Co., Ltd.

 

Pongee Industries Co., Ltd. is one of the leading manufacturer specialized in researching and developing in field of signal processing and automatic identification products in Taiwan. Especially focus on access controller and time & attendance systems. “Pegasus” brand is registered in Taiwan and many countries by Pongee Industries Co., Ltd. since 1987 as the famous brand in the world for marketing Pongee’s related access products.

 

Also, Pongee provides and develops a complete series of biometric, car parking system, lift access control system, prepaid value card system, proximity card readers, electronic Locks….etc. These products can be applied in simple access control, central controlled building automation system, time recorder, ATM foyer access …etc.

 

Pongee consistently strives to do the best in the development and sales of high quality, high technology and reliable products for customers. Volumes OEM or technical challenged ODM are heartily welcomed.

 

Need more information about access controller or others, please try to check out Pongee’s website to find the details you need.

Choose Pongee,

You Will Realize What An Excellent and Amazing Company They Are!

 

 

Pongee Industries Co., Ltd.

5F., No.738, Chung-Cheng Rd., Chung-Ho District, New Taipei City 23511, Taiwan

TEL: (886)2-8228-0198

FAX: (886)2-8228-0191

E-mail: pongee@pongee.com.tw

Taiwan Leading CB Antenna Manufacturing Expert – Evercom

Founded in 2000, Evercom has worked very hard to be the top quality antenna manufacturer in Taiwan.

 

Today, we specialize in the design and manufacture of 4G LTE, 3G, WIFI, PCS, WCDMA, GPS, DVB-T, UHF/VHF, CB antenna among others. All Evercoms’ products are design combine many of these together into one unit to make customer easy installation. We want the consumers enjoy the luxurious of life through safe and good quality of communication.

 

Our senior engineers focus on antennas for Automated Meter Reading (AMR) and Terrestrial Trunked Radio (TETRA) constantly continues to generate success, and our antennas developed for special area demands have received our customer acclaim. We welcome any custom-made specification and accept your OEM/ODM projects. If Evercom can be of any assistance about CB antenna to yourself or your company, then please contact us.

 

 

Evercom Communication Technology Co., Ltd.

No.108, Jiesin St., Taoyuan Dist., Taoyuan City 330, Taiwan (R.O.C.)

TEL: 886-3-376-5678

FAX: 886-3-376-5319

E-mail: service@evercomtech.com / gtevercomtech@gmail.com

Ceramic Capacitors Manufacturing Expert – Zonkas Electronic

Zonkas Electronic specializes in manufacture of Ceramic Capacitors which are applied to various industries.

Ceramic Disc CapacitorCeramic Disc Capacitor

SMD Multilayer Ceramic CapacitorSMD Multilayer Ceramic Capacitor

 

The ceramic capacitor is a capacitor constructed of alternating layers of metal and ceramic, with the ceramic material acting as the dielectric. Zonkas has well-equipped manufacturing facilities that are operated by a team of experts. The strong team comprises of engineers, technicians, marketing professionals, quality analysts and customer services.

 

If you want to learn more ceramic capacitors information, please feel free to send your inquiries to Zonkas.

 

 

Zonkas Electronic Co., Ltd

No.13, Ln. 65, Fuya Rd., Xitun Dist., Taichung City 40764, Taiwan

TEL: 886-4-24613820

FAX: 886-4-24612387

E-mail: zonkas@ms18.hinet.net

Carbon-Based: Unique Functions and High Reliability UAV Manufacturer

Established in March 2007, Carbon-Based Technology Inc. is the professional UAV manufacturer and devoted in complete system design, integration, manufacturing, and global marketing of Unmanned Aircraft System. Moreover, we are the only company with civilian UAVs that can be operated in critical snowy or raining weather.

 

We not only can offer high reliability Unmanned System as a platform for “Intelligence Gathering”, but also can offer total solutions for various aspects. Through this Hi-tech and Hi-reliability UAS platform which is 100% researched & developed in-house, it can integrate with techniques of data processing and analyzing for relative study fields such as GIS and Remote Sensing, Team Carbon-based can offer our clients with totally intact and useful intelligence on the ground as well as in the air. Especially for fields of anti-disaster and geographic spatial application, we have assisted clients from various professions to acquire priceless feedbacks. This also has proved core values of Unmanned Systems of Carbon-based Technology!

 

Our well experienced team will continuously strive for perfection and keep improving our designs and systems for state-of-the-art advance technology for meeting market demands.

 

If you are interested in learning more information about UAV manufacturer and unmanned aircraft systems, please do not hesitate to contact with Carbon-Based for further details!

 

Carbon-Based Technology Inc.

Add: Central Taiwan Science Park / 3F, No.30, Keya Road, Daya District, Taichung City, 42881 Taiwan

Global Hotline: +886-4-2565-8558

Fax: +866-4-2565-8559

E-mail: info@uaver.com

Applications of Antenna in Transportation – Cirocomm GNSS Antenna Manufacturer

With the fast developing and popularity of smart phone, the need of services and applications of Internet increase rapidly. Aside from consumer electronics, automotive telematics system also applies wireless communication technology-. The new automatic telematics system includes navigation, Bluetooth, GMS/LTE, and WIFI. Wireless communication has become a very important part of telematics systems.

 

In addition to automotive telematics system, wireless communication technology also plays a very important role in transportation area, such as fleet management, marine navigation, and even in-flight WIFI system. These new applications indicate the value of wireless communication technology. Cirocomm’s products applied massively in transportation industry. From active/passive GNSS antenna, GSM/LTE ceramic antenna, to WIFI antenna that designed dedicated to In-flight WIFI system, we provide variety choices of quality antenna solution for transportation industry.

 

Reference Case

Telematics system

 

Cirocomm Technology cooperates with world leading Italian Tier 1 automotive system supplier, we provide GNSS antennas and multi band GSM ceramic antennas for their automotive telematics systems.

 

OBD

 

One of the famous OBD brand in America applied with Bluetooth, GPS, and GSM antennas that designed by Cirocomm.

 

In-Flight WIFI System

 

We assist one of world leading In-flight entertainment and communication system supplier with WIFI antenna for their very first In-flight WIFI system. With ceramic patch antenna’s unique characteristic, we successfully designed the antenna which suitable for cabin environment.

 

Founded in 1996, Cirocomm is a leading provider and designer in microwave communication components industry. As the first and the only these years, we are providing a large scale of passive 3C components, including dielectric resonators, dielectric filter and ceramic one supplier. Cirocomm also supplies quality antenna series such as GNSS antenna, GPS antenna, WIFI antenna, and chip antenna etc. If you need more information about our products, welcome to visit the website of Cirocomm to obtain further specifications and details. Feel free to contact with us.

 

 

Cirocomm Technology Corp.

Address:1F.,No.1492,Chunri Rd., Taoyuan Dist., Taoyuan City 330, Taiwan (R.O.C.)

Tel:+886-3-3576889 Ext:632

Fax:+886-3-3576786

E-mail: sales@cirocomm.com.tw