Guide of Access Controller: What is ESD Access Control System?

Pongee ESD Access Control System

What is ESD Access Control System?

ESD access control system, anti-static access channel, stand-alone systems (integrated human static test access channel gate) is a combination of static test ban control gate and channel advanced products.

 

In many settings electrostatic protection areas (EPA) in places where static footwear and static wrist strap testing are based on the traditional way of testing only be, difficult to implement untested first time by personnel prohibited from entering the case of the EPA. ESD access control system for this shortcoming, direct and effective solution to the problem, workers entering the EPA zone really good staff wear or anti-static wrist strap shoes ready, combine three roller gates, wing gates, swing gates, automatic door sensors, etc.

 

As electronic locks or access gates ESD anti-static test personnel access control equipment. Plant personnel can provide basic access control functions and static test ways and orderly civilization, did not enter the EPA to eliminate electrostatic protection areas by electrostatic testers, and rapid control off the rod or gate, organize evacuations in case of emergency.

 

Looking for Best ESD Controllers? Don’t Miss Pongee!

Taiwan famous and professional access control system manufacturer, Pongee Industries Co., Ltd. also provides excellent ESD access control system.

 

The advanced Pongee ESD ACS system is integrated with ESD Tester, contactless Access system and ESD Management Application software together. During the past time, many EPA (Electrostatic protection Area) control for the electrostatic shoes, wrist strap are almost tested then recorded manually so easy to make mistakes, this not only wastes time but not easy to audit.

 

The Pongee ESD ACS system is managed by PC to make sure the person to test the ESD resistance value before entering EPA area, record the access time and control the turnstile or release alarm to reject illegal access. Also, with the failsafe function of the turnstile or electrical locks in emergency to secure the personal life.

 

Features of Pongee ESD Controller

  • The system is mainly consisted of ESD tester, ESD access controller, management software, communicators and the electrical gate controller (turnstile, strike or power bolt).
  • ESD permission has 8 options as checking Left and (or) Right hand and (or) the feet combination and the qualified impedance value range.
  • The ESD tester PP-6750V/ESD provide permission level setting, inquiry, alarm function, test and record the PASS or NG judgment.
  • The Access Controller equipped with LCD screen for taking the action, display the card & staff number, calendar year and date, clock, testing data and the error message.
  • The access controller could control the intelligent gating devices such as Turnstile, swing gate or plate gate. Also, it could control the electric locks such as power bolt, magnetic lock or strikes. The user also could push the exit button to go out.
  • The ESD ACS can be integrated with Time attendance module; it can provide the ESD ACS access events served as Time Attendance data base to make many HR reports.

 

Main Application Fields

ESD access control system are used for SMT production line, clean room such as semiconductor fab, high tech RD room, or military ESD sensitive areas, explosive processing areas, maintain or calibration areas for aerospace industries, pharmacy , bio-chemical and hospital ESD restraint areas.

 

If you have requirement or more information of ESD access control system, no hesitation, come and visit Pongee Industries Co., Ltd. for more details of access control system.

 

Pongee Industries Co., Ltd.

5F., No.738, Chung-Cheng Rd., Chung-Ho District, New Taipei City 23511, Taiwan

TEL: +886-2-8228-0198

FAX: +886-2-8228-0191

E-mail: pongee@pongee.com.tw

Advertisements

Guide of EDM Spare Parts: Do You Know What An Isolator Plate Is?

Why Do You Need An Isolator Plate?

SUNRISE-EDM Isolator Plate G307GLAB
Using good insulation materials to protect the copper wire, and prevent the workpiece from cutting incorrect places, as well as provide a stable working environment.

 

The wear parts wear down over time as Wire EDM Machines are used. Therefore, Sunrise offers isolator plates with high strength, high wear resistance, smooth surface it doesn’t contain other impurities, .good insulation performance, easy to assembly, long lifetime, suitable for many types and brands EDM machines are available.

 

Moreover, Sunrise also can offer isolator plates for customers as per their specific work requirement.

 

Choose Sunrise As Your Isolator Plate Supplier

Sunrise EDMTech Co., Ltd. is as a global supplier of high-quality EDM consumables which is designed and built to keep that efficient operation of equipment.

 

The company has long been working for technical interaction and technology transfer cooperation with Japanese. With the increasing demand for precision machining on the market, Sunrise has mastered key technologies, rigorously focused on each production detail, manufactured high quality products and successfully exported them to dozens of countries overseas.

 

If you require an isolator plate for your EDM machines, I highly recommend you to check out Sunrise website and contact them directly. Now, to get more details of EDM spare parts and this company, please do not hesitate to visit Sunrise EDMTech Co., Ltd.

 

Sunrise EDMTech Co., Ltd.

No.41, Xingbang Rd., Taoyuan Dist., Taoyuan City 330, Taiwan (R.O.C)

Tel: +886-3-2709191

Fax: +886-3-2709229

Email: service@sunrise-edm.com / export@sunrise-edm.com

Taichung, TAIWAN – GRECO 2018 – ISOTHANE TPU Allowing Prospects of Eco-Friendly and Light Weight Options

In the category of TPU resins, GRECO has released products that could replace rubber used in outsoles for footwear manufacturing. “The purpose for TPU replacing traditional raw materials is to on one hand expand eco-solutions, and the other reduce processing time while improve the actual performances of the end-production” Greco explained. Other replacement includes the introduction of ISOTHANE Calendar Sries. ISOTHANE Calendar replaces PVC in making synthetic leathers. The primary advantage is that the finish would increase the abrasive resistant level as well as flame resistant capacity.

 

ISOTHANE 7000 Series Aliphatic Grade is another refined series that has non-yellowing features, low temperature flexibility and excellent resilience property. These new features will lead the way of numerous practical uses for TPUs, such as the protection films of automobiles.

 

GRECO emphasized their future development roadmap for TPU would be in polishing the R&D in expanded-TPU. The goal is to make expanded-TPU into pellets and let them expand through microcellular process, which would be applicable for injection machines to produce environmentally friendly foam TPU. Foam TPU has the resilience over 60% while it maintains flexibility in low temperature. “This product will be extremely beneficial for light-weight solutions and applications in the energy industry” GRECO indicated.

 

More pioneering projects are being tested between GRECO and their customers. In 2017 GRECO explored new markets for TPUs, one including using corn-extracted bio-based in making TPU bibs with Sweden customers for the Chinese market. The other practice is to use long fiber reinforced thermoplastic on the wind turbines, which would then protect the turbines from wind resistance, and prolong the life-cycle. The advantages are that the long fiber reinforced TPU has great tensile strength to withstand the wind resistance while being much lighter than metal, and the design could be highly accurate in fitting the turbines.

 

The final development for TPU will be in promoting engineering grade application: ISOTHANE 8000 are TPU engineering grades that appear to be property-suitable for extruder and injection molding applications. “We are expecting the increase adoption in electronics, automobile, hand tools, home appliance, medical gadgets, optical products, and so on” GRECO remarked.

 

Duke Shih / Angie Lai

Tel: +886-4-2358-7676 Ext: 620

Email: duke@greco.com.tw

Website: https://www.grecoresin.com/en/index.html

Neoprene Fishing Waders: Pacific Eagle, The First Choice of Hunting Waders Manufacturer in Taiwan

Waders refer to a waterproof boot extending from the foot to the chest, available in neoprene wader and Gore-Tex variants. Quality breathable wader neoprene fishing waders are essential part of your hunting or fishing gear. People like fly fishermen use waders because they stay in the water for hours on end, and they need the proper protection. As you trek through water or marshlands, you can go in the field knowing you’re protected with waders that work as hard as you do.

 

Waders, high waterproof boots used for wading, as by fishermen, duck hunters, or laborers. This family of waders has a size for most everyone including men and youth in most body sizes. Wader production is our specialty at PACIFIC EAGLE. They have developed expertise and resources which are unparalleled.

 

Taiwan Best Manufacturer for Hunting Waders

Pacific Eagle, a specialized OEM company, was re-established from Huah Cheng Factory in 1991. They have engaged in manufacturing of neoprene, hunting and fishing field products for over 25 years.

 

At Pacific Eagle, to provide customers with highest quality products is always their top priority. To ensure all the products being in good quality and in best condition, each of their operational facilities is staffed with well-experienced personnel. On the other hand, they dedicate to develop new patent to keep pace with technology trend. Customers can count on them for not only bulk production but also new style development.

 

Advantage of Pacific Eagle

  • Competitive price
  • High Quality Products
  • New Technology Patents
  • On-time Delivery
  • Professional Quality Control Team
  • Warranty & After Service

 

If you have any interest in Pacific Eagle neoprene fishing waders, please do not hesitate to check out their website and feel free contact them immediately!

 

 

Pacific Eagle Enterprise Co., Ltd.

No.731 Shenzhou Rd., Shengang Dist, Taichung City, Taiwan

TEL: +886-4-25623975

FAX: +886-4-25623948

E-MAIL: sales168@mail.pacificeagle.com.tw

First Choice of Adhesive Manufacturer – Great Eastern Resins Industrial

Leading industrial environmental protection concept, to become industrial leading brand.

Best Cooperation Partner for Shoe Adhesive


Established in 1955, Great Eastern Resins Industrial Co., Ltd. (GRECO) is the first manufacturing company in Taiwan built specifically to produce adhesives for the shoe industry. GRECO has been working hard to achieve a high standard in quality, technology, and services to all customers.

 

GRECO is able to provide customers a full range of applications. There are four product lines: adhesives, TPU Resins, Dry Film Photoresists, specialty chemical.

 

GRECO continues as the market leader by pursue innovation, and leverage the latest key technology in the industry.

 

The GRECO way: team spirit, responsibility, innovation, making good things better, and always demanding more from themselves. The company is working toward its aspiration of taking GRECO into the next century with a global sales network.

 

Make GRECO a responsible corporate citizen that excels in quality, technology, environment management, safety, health and customer satisfaction.

 

GRECO Operation Principle

 

To meet the demands of a competitive and rapidly changing environment while taking quick advantage of its profit base, GRECO established a management philosophy of ” Re-creation, Teamwork, and Long-Term Perspectives ” as part of its multi-faceted corporate culture program.

 

Now, adhesive manufacturers are in an environment of rapid change, with industries transforming and being taken over. But, GRECO firmly believes that the only way to success in such an environment is for each and every employee to move with the times, growing with the company and constantly pursuing better quality.

 

If you want to learn more information about adhesive manufacturer and industrial glue, come and visit Great Eastern Resins Industrial Co., Ltd… You will find that you need.

 

Great Eastern Resins Industrial Co., Ltd.

No. 35, 34th Road, Industrial Park, Taichung City 40768, Taiwan

Tel: 886-4-23587676

Fax: 886-4-23581296

Email: greco@greco.com.tw

High Quality Quarter Turn Electric Actuator Manufacturer – Sun Yeh Electrical

Professional Electric Actuator Supplier

Established in 1986, Sun Yeh Electrical has been adhering to understand and satisfy customer demand and expectations. Based on this principle, OM series, spring return fail-safe series, and linear series electric actuators have been developed and acquired patents in Taiwan, USA, and China with solid gearing structure.

 

Sun Yeh electric actuators fit with various types of valves which are widely applied to industrial technology. Moreover, its linear actuators are also suitable for irrigation, water treatment, HVAC, chemicals, food processing, mining, tunnel / metro ventilation, smoke extraction, food industry, environmental protection system, and so on.

 

Below, I will present you a quarter turn electric actuator from Sun Yeh.

 

OM Quarter Turn Electric Control Actuator

OM Quarter Turn Electric Actuator OM-F

Sun Yeh OM series quarter turn electric actuators are designed to provide torque ranges from 35Nm to 4500Nm. The users determine a proper model per load requirements.

 

A planetary gearing is utilized with self-locking to prevent valves from being back driven and provide actuators with stable and reliable operation.

 

ISO 5211 Flange connection is used for mounting actuators to valves and a raised mechanical position indicator is used to enable the operators to identify valve position. The most distinctive design is clutch-less manual override (except BM-2 and OMA). The clutch-less design enables the actuators to be changed from electrical control to manual operation without clutch or brake to achieve easier operation thus increases mechanical reliability and decrease the failure rate. With the design, OM series has obtained new-type patent in Taiwan, USA, and China.

 

Interested in Sun Yeh Electric Actuator?

If you have any interest in quarter turn electric control actuator and much more electric actuators, Sun Yeh Electrical will be your best cooperation partner. Get more details please feel free to check out Sun Yeh product catalog and contact them at 886-4-26985666.

 

Sun Yeh Electrical Ind. Co., Ltd.

No.68, Ln. 854, Sec. 1, Shatian Rd., Dadu Dist., Taichung City 432, Taiwan

TEL: +886-4-2698 5666

FAX: +886-4-2698 1258

E-mail: service@sunyeh.com

Taiwan Custom Embroidery Supplier – Beauty Emblem Inc.

Beauty Emblem Inc. was founded in 1983. With more than 30 years experiences and expertise, the company specializes in bringing traditional embroidery skills to new creative modern trend. You can find a variety of embroidered products: in addition to embroidered patches including regular computer embroidery and 3D puff, pins, they also have chenille, PVC, TPU, leather patch, printing patch, embroidery with sublimation patch, applique, woven labels, epaulets, key chains, luggage tags, and promotional goods…etc.

 

Philosophy of Beauty Emblem

  • Team

Beauty Emblem Inc. is a team that offers best service from order, pattern (design), production, quality control, delivery and customer-Service.

 

  • Technology

Apply the highest scale software and hardware to achieve superior quality and efficiency.

 

  • Innovation

They understand people love new things, R&D group of Beauty Emblem Inc. surely satisfy all appetite!

 

Certification of Beauty Emblem

  • Factory in China: ISO 9001:2000
  • All thread and gel are certified to OEKO-TEX® Standard 100

 

Popular Products:

  • Embroidery Badge / Patch
  • Embroidered Promotional Items
  • Embroidered Luggage Tags & Keychains
  • 3D Puff Embroidery
  • Cross Stitch Watches
  • Custom Embroidery

 

If you have any interest in Beauty Emblem custom embroidery, please do not hesitate to check out their website. Now, visit Beauty Emblem to get kinds of beautiful embroidered badges.

 

 

BEAUTY EMBLEM INC.

5F., No.68, Jiuqiong St., Luzhou Dist., New Taipei City 247, Taiwan (R.O.C.)

Tel: +886-2-8283-1139

Fax: +886-2-8283-5193

Email: service@beautyemblem.com